It’s Friday but Sunday is Comin’

That’s My King!

Find more here: http://www.ignitermedia.com.

Pottery Barn Inspired Bedroom Decor November 30, 2009 Hearing that a post has inspired both creativity and frugality in one of my readers delights me to no end. When Cara emailed me that she had some Pottery Barn inspired bedroom decor and had conquered a Pottery Barn chandelier for under $10, I was delighted that she shared the pictures. Her ideas can be fitted to any number of varying decorating tastes. I am in the process (yes, the process has been stalled on quite a few occasions) of finishing my girls’ room with a PB inspired butterfly theme. I can’t wait to show you how an entire room makeover can happen for under $100 (with furniture). This butterfly chandelier is a wonderful start. Here is the original inspiration from the Pottery Barn, which is no longer sold. Considering that this gorgeous Chapiz Chandelier is selling for $129 right now, I am guessing, the butterfly one would not have fit into my frugal bedroom decor category. But Cara’s sure does!! Let’s see how you can make one of these Pottery Barn inspired chandeliers for less than ten dollars. Your daughters will love you for it. Supplies: Embroidery Hoop (only the solid hoop is needed; the hoop I used is about 14in in diameter) Twine / String Ribbon (1/2 inch or so width) Ribbon (thin) Beads Card stock Paper (I used 3 colors) Butterfly Template or punch (I wanted my butterflies to be about 3 inches wide – larger than any of my punches – so I used this template from Martha Stewart. Hot Glue Gun Ribbon Punch (optional – this is a tool I use for scrapbooking that punches out two slits for ribbons to feed through) (1) Take the embroidery hoop and tie a grid across it with the strings. I chose to do three strings in each direction. (You can see the grid in image directly below). Make sure to tie the strings tights. (2) Using the hot glue gun, wrap the ribbon around the hoop until it is completely covered, periodically gluing it so that the ribbon stays put. Once the hoop is covered, add two ribbons criss-crossing for hanging. (3) Cut out your butterflies. I opted for 36 butterflies in dark pink, pale pink, and white. Cut slits in the middle of the butterflies just wide enough for the thin ribbon to feed through. You want a tight fit so that the butterflies stay put on the ribbon. I used a ribbon punch, but you cut also just use scissors. You could also try using an adhesive if you have trouble getting the butterflies to stay, though you might want to wait until the end and the butterflies are exactly where you want them (4) Start assembling the butterflies on the thin ribbon, threading a few beads on the bottom to help weight each strand. You can add as many butterflies on each strand as you like for your design. For the chandelier effect, have a longer string in the middle and gradually have shorter strand toward the outside. Based on the size of my butterflies, I opted for four butterflies on my center strand (tied to the middle point of the grid). Then I had 4 strands of three butterflies, 4 strands of two butterflies, and 12 strands of one butterfly. I then used to three beads at the end of each strand. As a hint, find someplace to balance the hoop so you can look at the strands as you attach them to the grid. That way, you can play with the length you want. Since I tend to do crafts on my living room floor while watching TV, I brought in two of my kitchen chairs and balanced the hoop between the seats. That let me keep shifting things until I achieved the look I wanted. (5) After you have attached all the strands to the grid and have everything set, clip any excess ribbon from where you tied the strands and go hang your chandelier I hope you have enjoyed this beautifully frugal way to decorate your girl’s room. I know I sure did.

A Christmas Stocking Tutorial Just for YOU!

The Final Product

Ballard version

November 14th, 2009 1 Comment Sewing · Tutorials
Tags: Ballard, Christmas, Sewing, stocking, tutorial

If you would like to make your own Ballard-esque Christmas stocking, here’s how to do it:

Materials:

• 5/8 yd ivory duck cloth
• 24″ x 7″ rectangle of leopard print cotton for ruffle
• 12″ x 2″ rectangle of leopard print for loop
• 12″ x 2″ rectangle of interfacing for loop
• 8.5″ x 4.5″ scrap of cotton fabric for embroidered name (optional)
• 8″ ball trim
• red and green scraps of felt/cotton/flannel/etc for accents (circles, bones for dogs, or fish for cats)

Directions:

1. Download pattern PDF and tape pieces together.
2. Cut out (2) stocking pieces (front and back) from duck cloth.
3. Cut out desired number of accents from red/green fabric and pin to front and back pattern pieces. Be sure to leave space on the front piece for the 8.5″ x 4.5″ rectangle if you are adding a name.
4. Use a zigzag or decorative stitch to attach accents to stocking. Trim any part that hangs over.
5. If adding a name, take your embroidered 8.5″ x 4.5″ rectangle. Press under 0.5″ on both the top and bottom. Pin to front of stocking and edge stitch top and bottom. Trim sides to match edges.                

1. Serge or zigzag the top of the stocking (both front and back pattern pieces).                
2. Sew trim to the top of the FRONT stocking piece with a 1/4″ seam.
3. Place the front and back pattern pieces right sides together. Serge or sew around all sides, leaving the top open. Finish edges with a zigzag if you didn’t serge.
4. Turn stocking right side out and press well.
5. Take your 24″ x 7″ leopard fabric and sew short ends right sides together to create a tube.
6. Press tube in half, wrong sides together. Edge stitch fold. Finish raw edge.
7. Baste the bottom of the tube twice. Pull bobbin threads to create a ruffle the same perimeter as your stocking opening.          
8. Slide the ruffle over the stocking opening, aligning raw edges.
9. Sew ruffle to stocking with a 1/4″ seam allowance. 
10. Press ruffle up. Edge stitch in place. 
11. Now for the loop. Iron the 12″x2″ interfacing to the wrong side of the 12″x2″ leopard print fabric.
12. Sew long sides, right side together. Turn tube right side out. Press. Edge stitch sides.
13. Fold in half to make a loop and zigzag raw edges together. 
14. Pin loop to the inside of the ruffle. Box stitch.  
15. That’s it! (I just added this step because 20 steps sounds better than 19).

I’m all about doing the natural thing whenever possible.  I love this post from Simple Mom on doing just that—Natural beauty and how to go about it.  Here are the tips from Simple Mom:

by Tsh on November 16, 2009

in green & frugal living

So we’ve talked about going shampoo-free, and we’ve talked about using oil to clean your face naturally. But a few of you have asked — what about the rest? What about soap, toothpaste, lotion, deodorant, and the like?

I’ll be the first to admit that going natural with my toiletries and cosmetics is new to me. This isn’t something I’ve done for years, and am just now dispensing my experiential wisdom. Switching to homemade or natural is something I’ve been doing just over the past six months, so I’m learning as I go.

I do know that the more I learn about what ingredients are in conventional toiletries, the less comfortable I am in spreading them on my largest, most porous organ. But I’m not an alarmist, so we’re doing this gradually, as we run out of the stuff we’re already using.

Here are the remaining product choices we make in our family, tweaking and adjusting as we go.

Soap

Typical ingredients for conventional shower gels are detergents, preservatives, fragrance, and foaming agents. None of these things are toxic in very small quantities, but they do enter the bloodstream from our pores, and they’re technically not necessary to get clean. So I figure — why bother using them if I don’t need them? And they’re extremely dangerous in larger quantities.

Many people make their own soap, but I don’t. I just don’t have the time right now. So for us, we use Dr. Bronner’s Pure Castile Soap. It’s concentrated, so just one bottle will last ages. There’s nothing in it but pure castile soap and essential oils (if it’s scented).

Once you start using pure and simple castile soap, you’ll realize the film that traditional shower gels leave. Dr. Bronner’s is cost-effective, long-lasting, and serves many purposes. My husband actually washes his hair with this instead of the baking soda and water rinse that I use.

Not only can you wash your body and hair with castile soap, you can also use it as a household cleaner, as dish soap, as a produce rinse, as laundry soap, and even as toothpaste.

Toothpaste

Most conventional toothpastes have dyes synthesized from petroleum, sodium fluoride, foaming agents (also used in engine degreasers and strong household cleaners), and a myriad of other toxins.

There’s something about the fact that it’s used in the mouth that makes me squirm when I read about the nitty gritty ingredients in toothpaste. If you’d like to learn more, head here for more information.

I recently started making our own toothpaste, and I’m still tweaking the recipe. My husband isn’t crazy about the baking soda flavor, but I like it. Admittedly, if I had access to natural toothpaste brands like Tom’s of Maine, I’d probably stick to buying that. But since I don’t, here’s the recipe I’ve tried.

 

Basic Homemade Toothpaste

• 2 Tablespoons of coconut oil
• 2 to 3 Tablespoons of baking soda
• 1/4 teaspoon of Stevia powder
• a few drops of pure peppermint extract

Mix it all together until it resembles toothpaste.

Coconut oil has a melting point of 76 degrees Fahrenheit, which means this toothpaste feels more liquidy during warmer weather. It doesn’t change its effectiveness, though.

The Stevia provides a bit of natural sweetness, making the toothpaste palatable, as does the pure peppermint extract. You could try a variety of flavors to your liking.

Right now, I’ve got this toothpaste in a small lidded jar, and I scoop out a tiny bit with a tea spoon onto my toothbrush. But you can also get empty squeeze tubes, often found among camping supplies at stores.

Lotion and Moisturizer

Caramel Pecan Double Vanilla Bean lotion from Verbena Custom Blends on Etsy.

Body Lotion

Right now I’m using a deliciously divine lotion a friend here made from me. I watched her melt the ingredients together in just a few minutes over the stove, then whipped together in the blender to make a rich, creamy lotion. She used lemongrass and lavender essential oils together, and it smells heavenly.

There are a wide variety of homemade lotion recipes; it just requires the ingredients. Most ingredients are easily found in health stores or online, so don’t let finding these things stop you. If you’d like to make your own, Brambleberry is a popular and reliable source for lotion ingredients.

Lotion is simply a mixture of water, oil, emulsifier (which blends the water and oil together so that it doesn’t separate), a thickener (the most common is stearic acid, found in cocoa butter), and a natural preservative.

You could also support homemade and buy from an Etsy shop — there are thousands of options there.

Facial Moisturizer

In warmer months, I don’t need a moisturizer with the oil cleanser I use on my face. But as the weather cools, I find I do need a touch of moisturizer in the morning. I use straight up coconut oil, easily found in major stores. A tiny bit goes a long way, and since it’s also a common ingredient in other natural toiletries, a jar of this stuff really comes in handy.

Lip Balm

Photo from Diaper Ware

There are also lots of easy recipes for homemade lip balm and salve, but I use 100 percent lanolin. Yep, it’s the same stuff you use while breast feeding. In fact, I’m still using the tube I used when I was nursing my son a year ago! This stuff lasts forever.

It doesn’t dry out my lips like manufactured wax-based products, and a little lasts me almost the whole day. Lanolin is simply an ointment secreted by wool-bearing animals to protect their coats from water. So yes, it is essentially sheep sweat. But it’s not gross, I promise.

We’ve got a guest post on the way about making your own deodorant, and later, we’ll discuss using natural makeup, so stay tuned.

Natural Beauty: Clean Skin, Teeth, and Lips

Librarians, Please Avert Your Eyes When we came upon my now-favorite booth during our trip to the City-Wide Garage Sale, I think an audible gasp could have been heard from within our little shopping group. It was one of those booths that has something you want to buy in every square inch of space. I found a wonderful chippy side table exactly like I’ve been looking for, but the vendor wanted $50 and I wanted to pay more like $10. Thrifting has certainly spoiled me! At the same booth, we came across a pair of simple, but stunning wreaths made from book pages. The vendor told me that she made them sitting in front of the television. That’s my kind of crafting. I honestly don’t remember how much she wanted for these lovelies, but I think it was at least $40 a pop. Yeah, um, that’s way too rich for my blood. How about I show you how to make my version of the same wreath for just $2? Librarians and book lovers, please avert your eyes. Book Page Wreath Tutorial Supplies: •10″ foam wreath ($1 at Dollar Tree) •Paperback novel ($1 at Dollar Tree – depending on the length of the book, you may need two) •Brown and/or gray craft paint •Glue gun & glue sticks •Small strip of ribbon •A few paper towels •A few straight pins (optional) 1. Assemble your cast of characters. I felt slightly guilty about purchasing an author’s work from the Dollar Tree for the sole purpose of ripping up. I read a few pages of Loving Charity just to make sure I wasn’t about to destroy a literary classic; let me assure you that I wasn’t. You could definitely use vintage books, magazines or sheet music for this project or even select a book off of your own bookshelf that you don’t think you’ll read again. 2. Using the paper towels, I applied the brown paint to the edges of the book. I simply squirted some paint onto the towel and wiped it on the book. I painted the brown first and then applied a bit of gray. This will give your book pages a vintage look. To be honest, two colors aren’t completely necessary, so you can use just gray or just brown if you would like. Lay the book on a clean paper towel for about 5 or 10 minutes to let the paint dry. 3. Cut or tear a page out of the book and roll it in a method of your choosing. I put together a video tutorial to show you some different ways to roll the page if you are interested in seeing how I did it. The main thing to remember is that you want to roll the paper and not actually fold or crease it. 4. After rolling the page, apply some glue at the end of the roll and glue it to the wreath. Make sure that the painted edges are facing up. You will do this layer all the way around the wreath. When you have finished the full circle, flip the wreath over. That layer will become the bottom. If it won’t lay flat, put something heavy on top of it to flatten it out for a few minutes. 5. Continue rolling pages for your wreath. You will now fold a little tab on the bottom edge and apply glue only to that tab. Work your way from the bottom of the wreath up to the top, finishing one layer before moving to the next. 6. Once you get to the inside of the wreath, roll the paper and apply glue to the edge much like you did with the bottom layer. When you glue it on, the pages will be shorter than the wreath of the wreath. That’s okay. 7. At this point, your wreath will be mostly done, but there will be some sections you need to fill in. It should look roughly like this. To fill in your spaces, you’ll simply roll a page, apply glue to the ends, and just stick it in the wreath. The filler pages don’t necessarily need to touch the styrofoam wreath; they can stick to the pages already glued to the wreath if need be. Use the filler pages to fill in holes and add some height and visual interest to your wreath. 8. After I was finished filling in, I flip your wreath over and glue your scrap of ribbon on the back to serve as a hanger. I stuck a few straight pins in it to make sure it held tight to the wreath, but that’s purely optional if you glue it on well. All that’s left to do now is to find a spot to hang your new creation!

Questioning the safety of vaccines is a taboo topic in the United States and many other countries. The pressure is on most pediatricians to always counsel that the “benefits outweigh the risks” when it comes to vaccinating children. Yet, most parents have heard about the legitimate concerns many parents have that vaccines may have triggered their children’s autism or other neurological disorders (“NDs”).

 

The growth in the number of vaccines given to our children in the last 20 years is rarely discussed in the media, despite a stunning chart like this one that shows a 260% increase in vaccines administered (were millions of children dying from deadly diseases 25 years ago? No, they weren’t.) Parents should know that vaccines are never tested for their “combination risk”, despite the fact that children may get as many as 6 vaccines in a single visit to the doctor. And, when it comes to vaccines, how can it be possible that one size fits all? What may present as no risks for one child may present enormous risks for another.

 

As a parent contemplating vaccinating their child, we would offer the following 3-point plan to try to minimize the potential risks from vaccines. (Please note that we are parents, not doctors. What follows is not medical advice, it is the opinion of parents. Anything written here should be reviewed with a qualified physician. We are not giving you medical advice nor are we qualified to do so.)

 

1. Take Precaution

 

• Consider delaying vaccines until your child is 18-24 months old.

• Do not vaccinate if your child is taking antibiotics.

• Consider no more than one vaccine per doctor’s visit.

• If you plan to get the MMR vaccine, ask your doctor to give it in three separate vaccines for measles, mumps and rubella.

• Consider giving high doses of Vitamin C (3,000-5,000 mg per day) on the day before, of, and after vaccination.

• With the measles vaccine (MMR), consider high doses of Vitamin A (5,000 IU or more) on the day before, of, and after vaccination.

• If your child experiences any developmental delays, stop vaccinating until you learn more.

• If your child has an adverse reaction to a vaccine, stop vaccinating until you learn more.

• Always ask to see the vaccine insert, and never accept a vaccine that uses the preservative Thimerosal (mercury). For a complete list of vaccines with Thimerosal, see the FDA’s website here. Note: most flu shots today still contain Thimerosal.

 

 

2. Consider delaying vaccines

 

In our favorite article on vaccines, A User-Friendly Vaccine Schedule, written by University of Washington surgeon Donald Miller, M.D., Dr. Miller makes a number of interesting observations including:

 

“Public health officials, however, have not proven that it is indeed safe to inject this many vaccines into infants. What’s more, they cannot explain why, concurrent with an increasing number of vaccinations, there has been an explosion of neurologic and immune system disorders in our nation’s children.”

 

And:

 

“New knowledge in neuroimmunology (the study of how the brain’s immune system works) raises serious questions about the wisdom of injecting vaccines in children less than two years of age.”

 

Dr. Miller’s recommendation: don’t start vaccinating your child until they turn two years old.

 

 

3. Consider an alternative schedule to the CDC’s current schedule

 

It really is shocking to look at the 1983 recommended vaccine schedule and compare it to 2008. Does a child really need so many more vaccines today? Quiz your doctor by asking them how many vaccines were on the schedule in the 1980s. We have found that most have no idea. Three potential alternative schedules to consider:

 

I. Listen to the Doctor (Our favorite)

Comment: Donald Miller, M.D., is a surgeon at the University of Washington. His article, A User-Friendly Vaccine Schedule, is summarized into this schedule.

II. Turn back the clock

Comment: This is the schedule from 1983. If it worked for kids then, why doesn’t it work for kids now?

III. Go Danish

Comment: Denmark is a first world country based in Western Europe. Their schedule appears far more reasonable than ours. They have also been reported to have a much lower rate of autism than the U.S. Do they know something we don’t?

 

 

A second disclaimer: Please note that we are parents, not doctors. What precedes is not medical advice, it is the opinion of parents. Anything written here should be reviewed with a qualified physician. We are not giving you medical advice nor are we qualified to do so.

 

Final thoughts and resources

 

The parents of Generation Rescue were once just like you. We trusted our pediatricians. We vaccinated our children according to the latest schedule from the CDC. Then, often times immediately following a vaccine visit, we watched our children change and descend into autism. The reason this organization and website exists is because we don’t want the same thing to happen to you and your child. Some things that we have learned that we want you to know include:

 

1. Vaccines are big business

 

As this recent Wall Street Journal article reported, Merck stands to generate as much as $2 billion in revenues per year for their new Gardasil vaccine for girls targeting Cervical cancer. For a company beaten down by the Vioxx scandal, Gardasil’s success is a very important initiative, which according to the article has caused the company to push the vaccine out the door using questionable marketing techniques while legitimate concerns about safety and efficacy still exist. (A January 2008 story that made headlines across Europe reported on the deaths of two teenage girls immediately after getting the Gardasil vaccine — we couldn’t find any U.S. media outlets that covered the story.)

 

Vaccine manufacturers are no different from other corporations: they want to sell more of whatever it is they make. Unfortunately, there is a revolving door between the policy-makers who determine the vaccine schedule and the pharmaceutical companies who make vaccines, as our own Congressional Committee on Government Reform reported in this document titled Conflicts of Interest in Vaccine Policy Making.

 

2. Vaccines have real documented risks and the U.S. Government knows this.

 

Vaccines have risks and parents are rarely told about these risks. Any pediatrician who represents that vaccines are “completely safe” is not presenting the facts. Many vaccines contain other toxic substances including ethylene glycol (antifreeze), phenol (a disinfectant dye), benzethonium chloride (a disinfectant), formaldehyde (a preservative and disinfectant), and aluminum (another known neuro-toxin). Further, some viruses used in vaccines are cultured in animal tissue including chicken albumin and monkey liver. Click here for a complete list of the foreign substances found in vaccines, and here for a sample of a poster made and sold by Dr. Tedd Koren summarizing vaccine ingredients.

 

The CDC maintains a database called the Vaccine Adverse Events Reporting System or VAERS. This database keeps track of publicly reported adverse reactions to vaccines. In a ten year period (1991-2001), VAERS received 128,717 reports of adverse events, of which 14% were described as “serious” which means “death, life-threatening illness, hospitalization or prolongation of hospitalization, or permanent disability.”

 

The Federal Government maintains a National Vaccine Injury Compensation Program (VICP). Between 1990-2004, the VICP paid more than $900 million in restitution to persons injured by vaccines, and they provide a list of possible injuries by type of vaccine.

 

3. There are legitimate concerns over the efficacy of some vaccines.

 

Consider the flu vaccine as just one example of where there may be evidence that the vaccine does not work:

 

A recent study was published in the Journal of the American Medical Association touting the safety of flu vaccine. Nine of the studies authors had stated financial ties to vaccine manufacturers, and an additional four authors worked for the CDC. The study also stated: “It is also important to note that there is scant data on the efficacy and effectiveness of influenza vaccine in young children.”

 

On October 27, 2006, the British Medical Journal published an article also questioning the efficacy of the flu vaccine. The article noted: “Evidence from systematic reviews shows that inactivated vaccines [flu vaccines] have little or no effect on the effects measured. Little comparative evidence exists on the safety of these vaccines. Reasons for the current gap between policy and evidence are unclear, but given the huge resources involved, a re-evaluation should be urgently undertaken…The optimistic and confident tone of some predictions of viral circulation and of the impact of inactivated vaccines, which are at odds with the evidence, is striking.”

 

4. You can’t be forced to vaccinate your child or follow the CDC’s recommended immunization schedule.

 

Parents are often told that vaccinating their child is “required by law”. It is important for parents to understand what their rights are as all states offer either a philosophical or religious exemption from vaccinations. You have the right to design a vaccine program that is right for you and your child. Click here for more information.

 

5. AAP and MercuryThe American Academy of Pediatrics (AAP) has been perpetuating untruths about mercury for some time.  They have in many cases told the public that mercury has been taken out of vaccines since 2001.  This is not the case.  Today, 8 years later, there are still mercury containing vaccines in the pediatric and prenatal schedule.

In February, 2008 a great example of how the AAP attempted to manipulate the public into believing that vaccines did not have mercury in them was a letter to ABC trying to cancel the Eli Stone television show for wanting to tell a story about a family who won a vaccine-autism case in court.

 

The letter, written by the president of the American Academy of Pediatrics (you can view the letter here) ([ink to lettertoabc.pdf attached] calling for the cancellation of the show said:  “If ABC persists in airing the show, the AAP urges the network to include a disclaimer emphasizing: No mercury is used as a preservaitve in routinely offered childhood vaccines.”

 

At the time there were 5 vaccines commonly being used in the pediatric schedule as well as mercury containing vaccines in the prenatal schedule.

 

The AAP letter was false and even after direct communication from Generation Rescue the AAP would not retract or correct the information.  These tactics are common in communication from the American Academy of Pediatrics.  It appears they are more concerned about how to get the public to vaccinate than the actual truth.

 

Our letter to the AAP can be viewed here and the part about the mercury in vaccines is also below:

 

AAPs position about mercury in vaccines is not accurate.

In the letter to ABC the AAP wrote: “No mercury is used as a preservative in routinely offered childhood vaccinations.”

 

Mercury is still in 16 vaccines including 5 pediatric vaccines such as 3 flu shots, the HEP-B and the DtaP.

 

At best, this is similar to saying:

 

“No caffeine is used in coffee as a preservative.”

 

It is in there, just not as a preservative.  Parents are not concerned if mercury is in there as an adjuvant, or as manufacturing residue, or as an inexpensive antibacterial –they just want to know if it is in there.  Not stating that mercury is in 5 vaccines used for pediatrics is considered, by many, as deceitful.

 

What could have been written is something like “Mercury has been removed from many routinely offered childhood vaccines.” Or “Childhood mercury exposure from vaccines has been reduce by 65%”

 

The Truth About Mercury In Vaccines 

 

According the FDA’s website outlining vaccine administration for children (1) there is up to 300 picograms of mercury in the DtaP shot (Tripedia by Sanofi Pasteur, listed as the third item from the FDA website screen shot below)

 

and 25,000 picograms of mercury in one of the pediatric flu shots (Fluzone by Sanofi Pasteur)

 

and another pediatric flu shot has 12,500 picograms of mercury (Fluvirin by Novartis Vaccines and Diagnostics Ltd)

 

and a third pediatric flu shot by the same company under the same name is said to be preservative free but has trace amounts of mercury.  The exact amount does not have to be published if they are under 100 picograms but in this case but trace amounts of mercury are higher than trace amounts allowed in orally ingested items but  in this case is being injected in a child.  How toxic this is may be debatable, but what is not debatable is that there is still some mercury in the vaccine.

 

Additionally the Hep-B vaccine has up to 500 picograms of mercury (Published in table 2 outside the pediatric section in of the FDA document but labeled for use for “pediatric/adolescent” use).  This vaccine is used in pediatrics as well.

 

If I was responsible for public relations and messaging for AAP I would be concerned that saying there is no mercury in vaccines would cause a liability to the AAP if the child gets hurt by the mercury in the vaccine.

 

A family was recently awarded millions of dollars in one of the first cases in federal vaccine court related to vaccines and autism.  That is just one case.  (It is not publicly known but there are 12 other cases.) I do not believe the AAP wants this type of liability for inaccuracies or not telling the entire truth about vaccines.

 

According to the FDA, other mercury containing vaccines (some of them used in children and pregnant or perspective mothers) include the DT vaccine (two of them by Sanofi Pasteur, Inc.), the DtaP vaccine (Tripedia2 Sanofi Pasteur, Inc), two TD vaccines (Mass Public Health and Sanofi Pasteur), the TT (Sanofi Pasteur), the Hep B (GlaxoSmithKline Biologicals), the Hep A/Hep B, (GlaxoSmithKline Biologicals), the Japanese Encephalitis (Research Foundation for Microbial Diseases of Osaka University), and the Meningococcal (Sanofi Pasteur) (1)

 

In summary, there are 16 vaccines with mercury including 5 commonly used in pediatrics and all of them commonly used multiple times throughout the lifetime of the individual.

 

Many of these vaccines are also injected into perspective mothers who, studies show, can pass mercury down to the child through both her umbilical cord and mother’s milk.

 

Pregnant women and breast-feeding women are also marketed the flu shots and that mercury can be considered a pediatric exposure (at least prenatal) since it is passed to the gestating or breast fed child.

 

 

 

 

Articles:

 

1. Attempts At Eradicating Infectious Diseases Are Putting Our Children At Risk

National Vaccine Information Center

By Barbara Loe Fisher, President, National Vaccine Information Center

 

2. MMR and the Simple Truth about Autism

Age of Autism Blog

By Dan Olmsted

February 7, 2008

 

3. What Did the CDC Know and When Did They Know It?

Age of Autism Blog

By Mark Blaxill

December 13, 2007

 

4. The Age of Autism: Pox — Part 1

By Dan Olmsted, UPI

April 19, 2006

 

5. In the Wake of Vaccines Mothering

By Barbara Loe Fisher

September-October 2004

 

6. Vaccines: The Overlooked Factors

Autism Research Institute

Bernard Rimland, Ph.D., President, Autism Research Institute

 

7. DAN! Vaccine Guidelines

Autism Research Institute

 

8. Putting Toddlers At Risk With Mandated Vaccines

American Association of Physicians and Surgeons Online

By Jane Orient, M.D., Executive Director, American Association of Physicians and Surgeons

9. Congressional Investigation of MercuryUS Rep. Dan Burton is the Senior Member on the Government Oversight and Reform Committee.  He has led a congressional hearing on the safety of vaccines with a focus on mercury in health care products including vaccines. 

The link below is to the report his committee published after a three year investigation about how vaccines and mercury in vaccines is likely to play a causal role in neurological disorders including autism.

Mercury in Medicine: Taking unnecessary risks

 

 

Books

 

1. What Your Doctor May Not Tell You About Children’s Vaccinations

By Stephanie Cave

 

2. A Shot In The Dark

By Harris Coulter

 

3. The Vaccine Guide: Risks and Benefits for Children and Adults

By Randall Neustaeder

 

 

 

Links

 

1. National Vaccine Information Center

2. Vaccination News

3. Vacinfo.org

 

Toy Box Redo: Plain to Punchy

I had this really great vintage toy box from my childhood nursery, but the stark white seemed too blah. I thought about painting it, but they don’t make no-VOC spray paint, so that was kind of out. Then I remembered reading about applying fabric to walls with liquid starch and thought why not try it on the toy box?

It worked like a dream! Super easy to apply and virtually goof-proof, since it’s easy to adjust when wet.

Here’s how to do it:

- Get some liquid starch (available at any grocery store)
- Apply with a paintbrush directly to the fabric and then apply wet fabric to hard surface.
- Smooth it out with your hands to remove any wrinkles or air bubbles and adjust position if needed
- Do another layer of starch over it with the brush again.

The best part is that it’s easy to remove without damaging either the fabric or the item underneath.

I loved how it worked out so much I took the leftover scraps and carefully cut out the shapes and applied them to the wall to add some design to my new peach paintjob. I didn’t like the positions of a few of the shapes on the wall, so I just peeled them off and reapplied the same way – no mess or damage at all! You can even wash the fabric to reuse for something else later. The ultimate recycling project;) I wish I’d have learned about this trick years ago when I fiddled around with messy stencils and stamps as wall art – they never turned out half as nice either.

And here is the nitty-gritty from Rental Decorating Digest:

If being budget conscious is necessary for you, understand that fabric prices vary and could actually run into quite a bit of money depending on your tastes – this can be easily remedied by discount fabric stores and clearance sales.

The good news is when you remove the fabric from the wall, all you will need to do is wash it. It can be easily re-used for another craft project, good as new!

Keeping all that in mind – let’s get busy.  These simple instructions will help you apply and remove your fabric.

---

Materials:

• LINIT® Starch OR LINIT® Starch-n-Crafts™ Stiffener
• Fabric
• Clean sponge or paint roller
• Pan

Process:

1. Wash the wall to remove any dirt or film.
   

2. Lightweight fabrics, such as polished cottons, ginghams, and chintzes, are easiest to use. Measure from the floor to the ceiling and add a couple extra inches.
   

3. Cut the fabric accordingly. If fabric has a design, be sure to match the design before cutting the next panel as when using wallpaper.
   

4. Pour starch into a clean pan or paint pan or spray on if using stiffener (see Tip section if using spray stiffener). Apply starch to the top half of the wall with a sponge, paint roller or spray on if using spray stiffener.
   

5. Smooth fabric into place at the top of the wall, leaving about one inch to be trimmed later. Use push pins to hold the fabric temporarily in place. Apply more starch going down the wall as needed until you get to the floor, leave approximately one inch overlap at floor level.
   

6. Apply starch to the top of the fabric, brushing and smoothing the fabric in place to remove bubbles and wrinkles. Be sure the starch penetrates the fabric evenly.
   

7. Work your way down the panel, continuing to sponge or spray starch onto the wall, smoothing the fabric, and applying more starch.
   

8. Position the second panel, matching the design along the edge. Repeat steps.
   

9. Around windows and doors, leave a one inch overlap as with the ceiling and floor.
   

10. Fabric overlap should be cut when the fabric is completely dry. It will then cut clean and easily and any shrinkage will have occurred before you trim.

When Using Stiffener in Spray Bottle: Be sure to mask edges of ceiling & floor to avoid over spray. To Remove Fabric From Wall: Peel one corner loose, then gently begin to peel the fabric off of the wall panel by panel. If the fabric does not peel easily, dampen the fabric with water using a wet sponge and it should come right off.

Whether you choose to cover your entire wall or only a portion, you will enjoy the look of a professionally decorated room, without the permanence of paint or wallpaper!

The Secret of Thieves

The NY Times “Really?” column today profiles cinnamon oil as a natural antibacterial, part of my home-made essential oil hand sanitizer recipe modeled on the infamous “Thieves” blend.  What is this “Secret of Thieves”?

Props to Young Living Essential Oils (YLEO), the company that has popularized “Thieves” as a natural alternative to chemical alcohol-based sanitizers.  Their blend is a patented mixture of cinnamon bark, clove, lemon, rosemary and eucalyptus oils.  I have adapted this blend of oils for use as a DIY hand sanitizer, adding 1-2 drops of each oil (but 5 drops of the lemon oil – or grapefruit or orange, if you prefer) to a small dispenser bottle filled with filtered water and 1 tsp aloe vera gel.  We use it at the Whole Child Center and it’s been the feature of my last 2 Earth Day presentations at my children’s school.   We even made a cute how-to video.